Tag Archives: Motiva

Motiva set to restart Port Arthur crude unit-sources

Motiva Enterprises plans to begin restarting a crude distillation unit at its 600,000 bpd Port Arthur, Texas, refinery next week after it was shut in June to repair massive corrosion from a chemical leak, sources familiar with the refinery said on Wednesday.

Motiva has wrapped up the repairs and is in the process of transferring control of the unit to operations staff this week, the sources said.

The company, a joint venture of Royal Dutch Shell and Saudi Aramco, was forced to shut the giant new 325,000-bpd crude distillation unit (CDU) at the refinery in June after discovering cracked piping on a massive scale in the cornerstone unit of a five-year, $10-billion expansion project.

Motiva plans to have the unit, VPS-5, in production by the end of December, the sources said.

Motiva had said repairs were expected to finish sometime between late November and early December, with VPS-5 back in production by the first quarter of 2013.

If VPS-5 remains in operation into the new year, Motiva also plans to take one of the old crude units and a coking unit down for planned overhauls about midway through the first quarter, the sources said.

A Motiva representative was not immediately available to discuss operations at the refinery.

Motiva has not disclosed the price tag for repairs, but analysts have estimated the cost at between $300 million and $1 billion.

The new CDU was the centerpiece of the expansion that pushed the plant’s overall capacity to 600,000 bpd, surpassing Exxon Mobil Corp’s 560,500-bpd Baytown, Texas, refinery as the country’s largest.

But an influx of a corrosive chemical, during what workers thought was a brief, routine shutdown of the newly built CDU, cracked and ruined thousands of feet of pipe and other critical parts.

After the extent of damage from a leak of caustic sodium hydroxide into VPS-5 was discovered, estimates of the length of time needed for repairs ranged from six months to a year. Sodium hydroxide is used in small amounts to prevent heavy, sour crude oil, which VPS-5 is made to refine, from fouling the unit.

Motiva and its co-owners moved quickly to assemble needed replacement piping and staff to undertake repairs, which affected the atmospheric distillation section of VPS-5.

SOURCE: http://uk.reuters.com/article/2012/11/28/refinery-operations-motiva-portarthur-idUKL1E8MS88620121128

In hours, caustic vapors wreaked quiet ruin on biggest US refinery

In the end, all it took was a small chemical spill — perhaps less than a barrelful — to bring down the newest, mightiest oil refinery in the United States.

Three weeks ago, while workers repaired a minor leak at the Port Arthur, Texas plant owned by Motiva Enterprises, a few gallons a day of so-called “caustic” was inadvertently seeping into the newly built crude distillation unit (CDU), the 30-story-high network of interconnected cylinders and latticed pipelines at the heart of the refining process.

While harmless when mixed with crude, the undiluted caustic vaporized into an invisible but devastating agent of corrosion as the chamber heated up to 700 degrees Fahrenheit ( 370 Celsius); the chemical gas raced through key units, fouled huge heaters and corroded thousands of feet of stainless steel pipe.

Now, just weeks after they commissioned the biggest U.S. refinery project in a decade, two of the world’s biggest oil titans — Royal Dutch Shell and Saudi Aramco , which own Motiva — are rushing to repair the potentially billion-dollar glitch that has added an embarrassing and costly coda to a landmark $10 billion expansion.

After a five-year effort to double the plant’s capacity, making it the largest in the country, they must now reassemble many of the same people and parts for a blitzkrieg fix that may exceed the original $300 million cost of the unit: corrosion experts are flying in from across the world; hundreds of workers are being hired; bespoke 30-inch (75-cm) stainless steel pipelines and 30-story cranes may need to be obtained quickly, according to sources involved in the repairs.

Sources familiar with the effort provided Reuters with the most detailed account yet of what officials believe went wrong at the 325,000-barrels-per-day (bpd) unit known as vacuum pipestill-5 (VPS-5), showing how a series of seemingly minor glitches crippled the vast plant.


Motiva has said little about the incident. Late on Wednesday, 11 days after it occurred, the company confirmed for the first time that the unit might remain shut for “several months”. Sources say officials are telling workers that the unit could be idle for as long as a year.

On Friday, in response to Reuters questions, Motiva spokeswoman Kayla Macke confirmed the contamination: “The preliminary inspection indicates that parts of the new unit have been contaminated with elevated levels of caustic.”

The extent of the damage is still not known as portions of the crude unit are too hot to enter, according to the sources. Some areas may not be accessible for weeks.

Motiva has not reached a final conclusion as to the cause of the damage, but has developed a working theory on what experts said appeared to be a rare instance of “accelerated chemical corrosion”. The unit’s intense heat was critical: the rate of corrosion can double with every 10 degrees Celsius.

Even as it pitted the inside of the atmospheric section, a giant still that performs the initial and most basic stage of converting crude oil into fuel, the damage went undetected. Only when two fires broke out and a heater ruptured — once crude resumed flowing — did operators suspect something was amiss.

“They had the first fire and then they had the second one 20 feet away. They knew they had a problem,” one of the sources said.

Why caustic continued flowing into the unit while it was idled to repair an unrelated leak is unclear, and is a key part of the investigation to establish cause. It is thought a valve failed to shut completely, but why that happened is unknown.


While Motiva’s VPS-5 was idling, authorities believe a few gallons each day of caustic leaked into the unit. The caustics are a base meant to negate the acid in cheaper heavy, sour crude that the new CDU was made to consume. They prevent residue from blocking pipes and reducing crude intake.

Normally, the amount leaked in the CDU would have been harmless, diluted by the crude. But only a small amount of hydrocarbon was circulating through the still while it was out of production, the normal method to maintain so-called “warm circulation” during a brief shutdown.

By the following weekend, unaware of the caustic incursion, Motiva began reheating the unit to resume operations; as the temperature reached 300 to 400 Fahrenheit, the caustic vaporized.

Ground zero was the atmospheric section, one of the simplest but most important machines in a modern plant. Although vast in scale, today’s units are in many ways similar to the simple stills used to convert crude into kerosene for lamps at the start of the U.S. oil industry in the 1850s.

The core of any refinery, the main still boils crude at intense temperatures to split the hydrocarbon molecules into the initial components of fuels such as gasoline and diesel; the bulk of the output is an intermediate feedstock that requires further refining in a host of specialized secondary units.

Unlike a refinery blast, the misfortune unfolding at Motiva was relatively slow to materialize. The fires that erupted from small pipeline cracks that Saturday were small enough to be quickly extinguished by the workers on hand at the crude unit.

The extent of the damage was understood within two days.

“We have the worst-case scenario,” one of the sources said. “Extensive damage throughout the crude unit. All of it.”

Three engineering experts agreed that what one called “accelerated chemical corrosion” was rare, but not unheard of.

“The temperature issue could be a factor as well,” said Kevin Garrity, president of NACE International, a global organization for engineers studying corrosion, and a 38-year veteran of the industry. He compared the effect to pouring sugar into hot tea, which dissolves the crystals much more quickly than in a cup of cold tea.

Normally, corrosion problems can be prevented.

“From a general sense you would not expect this kind of deterioration and problems in such a short period of time. You might not even expect it in 30 years if you have the right combination of technology and inspection practices,” he said.


Motiva has yet to examine the fractionation towers — tall, thin, metal columns — as well as the main part of the atmospheric section, because they are still cooling from their operating temperatures, said sources recruited for the repair work.

The vacuum section of the VPS-5 — which takes the heaviest “residue” created in the atmospheric section and refines it in a vacuum, increasing the yield of feedstocks for other units — was not damaged, they said.

Operators have continued to run many of the unharmed secondary units, although without the crude tanks they must buy intermediate feedstock from other refiners or shut peripheral units, as Motiva did last week.

But stainless steel piping, some sections as large as 30 inches in diameter, was damaged. Such equipment, part of more than 700 miles of pipe used on the expansion project, is often built to order, and may be difficult and costly to replace.

“If someone has 30-inch stainless steel pipe for sale, I would guess they’re going to charge a premium price,” one of the sources said.

Instrumentation on the unit is also known to be damaged, according to the sources.

Up to 50 heat exchangers will need to be cleaned throughout portions of the new plant, according to IIR Energy, an industrial intelligence firm that gathers data on operations and project activity on thousands of assets globally.

Work on exchangers 300 feet (90 meters) above the ground will require large cranes, though likely not the giants needed for the original construction. The heat exchangers, which look like 30-foot-long cylinders collected in a metal frame, house lengths of tubing where feedstocks are warmed and refined products are cooled as they go to and from a refining unit.

IIR also told Reuters that all trays in the distillation column and components within the furnace would need to be replaced. It said no restart timeframe had been determined.

Soon the question of who is to blame will arise. The cost to complete repairs may be as much as replacing the whole unit, which was originally estimated to cost some $300 million when the project was launched in April 2005, according to IIR.

Without knowing exactly why the caustic leaked, it’s not possible to say who, if anyone, is at fault. The two main contractors for the project — Bechtel and Jacobs Engineering — declined to comment.

Meanwhile, the investigation continues, and oil traders await any word on when the plant will resume operations. Motiva will likely be “extra-cautious” in restarting, Auers of Turner, Mason and Co said.

“They’re really focused on the repairs,” one of the sources close to refinery operations said. “They don’t need to know the cause now. They’ve got 12 months to figure that out and fix it.”

SOURCE: http://in.reuters.com/article/2012/06/25/usa-refinery-motiva-idINL2E8HO4GH20120625

Texas refinery unit shut down for ‘several months’ as it investigates major corrosion problem

Motiva Enterprises LLC has announced it is preparing to keep its new crude oil unit shut for “several months” as it investigates major corrosion problems that have crippled the country’s biggest refinery weeks after a massive expansion.

In the first public acknowledgment of a potentially long-term outage at the Port Arthur, Texas, plant, Motiva co-owner Royal Dutch Shell Plc confirmed the 325,000-barrel-per- day (bpd) unit was shut due to “corrosion problems,” as posted on integritythatworks.com earlier this week.

“The outage of the new crude unit may continue for several months, while the causes of the issue are established and rectified,” Shell said in a statement late Wednesday.

Sources said earlier this week the outage, initially estimated at two to five months, could now extend to a year.

Shell, which runs the Motiva joint venture with state oil firm Saudi Aramco, said all secondary units built as part of the five-year, $10 billion project were fully operational, although some were running at reduced throughput.

Separately, sources familiar with operations said one of the new units — a catalytic feed hydrotreater that removes sulfur from feedstock going to the refinery’s gasoline-producing fluidic catalytic cracking unit — was being shut down this week because of a lack of feedstock from the idled crude unit.

The sources also said Motiva was shutting an older catalytic reformer, which creates gasoline additives.

Motiva officials were not immediately available to comment on details of the secondary unit operations.

In the statement, Shell said the refinery’s original 275,000 bpd complex was operating “as per plan.”

Motiva’s Port Arthur refinery is not shutting the refinery’s FCC, but will emphasize production of diesel, which is yielding higher returns for U.S. refiners as an export, the sources said.

The new crude distillation unit, which began production in April and was shut following a June 9 fire, may be idle for up to a year to repair extensive corrosion found in the unit.

SOURCE: http://in.reuters.com/article/2012/06/21/refinery-operations-motiva-portarthur-idINL1E8HL2TI20120621

Motiva Reports Work to Repair Pipe Corrosion at Port Arthur Refinery


Motiva Port Arthur Refinery will perform maintenance to remedy previously announced corrosion issues at some of the piping throughout the plant’s fuel gas system, according to a report filed with the Texas Commission on Environmental Quality.

Compressors at the West Side Gas Plant have already been removed and the filing, made public this week, said the company will temporarily place in service three replacement compressors. The use of these compressors could result in emissions and Motiva submitted the filing out of an abundance of caution, the report said.

Motiva submitted a similar notification for the compressors on April 23 and this follow-up was submitted because the maintenance work identified in the prior notice has not been completed.

The piping maintenance didn’t interfere with the commissioning of Motiva’s newly constructed 325,000-barrel-a-day crude distillation unit at the Port Arthur refinery last week. Crude oil processing rates reached about 80% of capacity, or about 500,000 barrels, before the new crude unit was shut, unplanned, on Monday to repair leaking valves.

The Port Arthur refinery has the capacity to process up to 600,000 barrels of crude oil a day.

A Motiva representative wasn’t immediately available to comment and typically doesn’t address day-to-day refining operations.

Motiva is a joint venture between Royal Dutch Shell PLC (RDSA, RDSA.LN, RDSB.LN) and Saudi Aramco.

SOURCE: http://www.foxbusiness.com/news/2012/06/08/motiva-reports-work-to-repair-pipe-corrosion-at-port-arthur-refinery/#ixzz1xJsB0cSe