MMB™-RM MMO Ribbon Mesh Anode
The MATCOR MMB™-Ribbon Mesh Anode is typically used in concrete, under tanks and for special applications.
The ribbon mesh anode is field assembled with titanium conductor bars and a resistance welder. The design life of the anode varies with operating current. The chart below provides some of the basic information you may require. If you need additional information please contact us.
While the mesh anode can be used for under tank applications, MATCOR recommends the MATCOR Tank Ring Anode System
|MATCOR Model Code||Width x Thickness||Anode Rating for 20 yr design in sand media||Electrical Resistance of Ribbon Anode|
|MMO/Ti Ribbon Anode 0.25” wide||MMB-0.25-R||0.25” (6.25mm) x 0.025” (0.6mm)||100 mA/ft (328 mA/m)||0.42 ohms/ft (0.14 ohms/m)|
Additional output versions may be available utilizing different mixed metal oxide coating loading. We can provide 0.75” and 1.25” tubes on a special order basis where needed.
MATCOR’s mission is to solve your corrosion problems. In addition to our broad range of proprietary corrosion prevention products, we are ready to assist with your corrosion engineering and field service needs, including design, manufacturing, installation, commissioning and ongoing maintenance, as well as full turnkey solutions.
To get in touch with our team of corrosion experts for more information, to ask a question or get a quote, please click below. We will respond by phone or email within 24 hours. For immediate assistance, please call +1-215-348-2974.Contact a Corrosion Expert