Turnkey Project Includes Pipeline Recoating & CP Upgrade

Working with fellow BrandSafway company Industrial Specialists LLC, MATCOR successfully completed a turnkey pipeline recoating and cathodic protection upgrade project ahead of schedule and to the operator’s complete satisfaction.

pipeline recoating project
MATCOR & Industrial Specialists team up on a complex pipeline recoating project.

Earlier this year, MATCOR purchased two state of the art dual air/hydro vacuum excavators. We have put these units to work as we expand our capabilities to include pipeline recoating services.

“We recently completed a major project in Oklahoma for a midstream client that leveraged our ‘Big Air’ vacuum excavators. This complex project challenged our existing capabilities and allowed us to draw on the resources and capabilities of our parent company, BrandSafway, to provide a full service cathodic protection upgrade and pipeline recoating in multiple locations.”—Josh Johnston, MATCOR Director of Sales

Pipeline Recoating Added to Anode Bed and Test Station Installation

The project consisted of six (6) anode bed installations and seven (7) test station installations – standard CP work for MATCOR; however, at each of the test station locations, we were also tasked with coating removal and recoating of the approximately 20 ft of pipeline exposed at each location.

The coating removal was complicated by the presence of asbestos. Prior to 1980, asbestos was typically used in a felt wrapping around the pipe along with an asphaltic (tar) outer wrap.

Asbestos can still be found in the coating of hundreds of thousands of feet of buried pipeline installed prior to 1980. MATCOR’s crew received one week of asbestos removal training to be properly qualified to identify, remove and dispose of the coating containing asbestos.

MATCOR’s parent company, BrandSafway, has in its portfolio of businesses Industrial Specialists, LLC (IS), which is an extremely well-qualified industrial coatings services team with over 35 NACE trained and certified inspectors and over 1,700 painters and supervisors.

MATCOR was able to partner with the IS Tulsa, OK office to deliver the entire project using in-house BrandSafway resources, making us a one stop shop for this level of work. MATCOR’s CP construction crews performed the vacuum excavation and asbestos coating removal, and then the BrandSafway industrial services crew performed the blasting, inspection and recoating work. One big company with a wide range of industrial capabilities.

Project Completed Ahead of Schedule

The project was executed successfully, completed two weeks ahead of schedule and to the pipeline operator’s complete satisfaction. We even identified two areas where the pipeline was directly on top of rock and the owner asked that MATCOR install a layer of rock shield over the completed recoat areas. At the end of the project, the pipeline operator affirmed that they would be using MATCOR again for similar project work.

Have questions or need a quote for cathodic protection or pipeline recoating services? Contact us at the link below.


Leave a Reply

Your email address will not be published. Required fields are marked *

Get News from MATCOR

Sign Up for Our Newsletter

    I understand my information will be stored securely for the sole purpose of conducting business with MATCOR, Inc. I agree to receive future email communication and understand that I may opt out at any time. View our Privacy Policy.
  • This field is for validation purposes and should be left unchanged.